JVC RX-5020VBK manual Operating JVC’s Audio/Video Components, English, CD changer, Cassette deck

Operating JVC’s Audio/Video Components

English

CD changer

After pressing CD-DISC, you can use the following buttons for CD changer operations:

3	: Start playback.
4	: Return to the beginning of the current
	(or previous) track.
¢	: Skip to the beginning of the next track.
7	: Stop playback.
8	: Pause playback. To release it, press 3.
1 – 6, 7/P	: Select the number of a disc installed in a CD
	changer.

If your CD changer is of 200-disc loading capability (except for

Cassette deck

After pressing TAPE/CDR, you can use the following buttons for cassette deck operations:

3	: Start playback.
FF	: Fast wind the tape from left to right.
REW	: Fast wind the tape from right to left.
7	: Stop playback or recording.
8	: Pause playback. To release it, press 3.
REC PAUSE	: Press this button to enter recording pause.
	Press this button then 3 to start recording.

Note:

Before starting the above operations, make sure that you have

changed the source name correctly. See page 8.

XL-MC100 and XL-MC301),

you can do the following operations using the number buttons after pressing CD:

1Select a disc number.

2Then select a track number (always enter two digits).

3Start playback.

Examples:

•Selecting disc number 3, track number 2, and start playback. Press 3, then, 0, 2, then 3.

•Selecting disc number 10, track number 5, and start playback. Press 1, 0, then, 0, 5, then 3.

•Selecting disc number 105, track number 12, and start playback. Press 1, 0, 5, then 1, 2, then 3.

CD recorder

After pressing TAPE/CDR, you can use the following buttons for CD recorder operations:

3	: Start playback.
4	: Return to the beginning of the current
	(or previous) track.
¢	: Skip to the beginning of the next track.
7	: Stop playback or recording.
8	: Pause playback. To release it, press 3.
REC PAUSE	: Press this button to enter recording pause.

Press this button then 3 to start recording.

Note:

Before starting the above operations, make sure that you have changed the source name correctly. See page 8.

26