JVC RX-5020VBK, RX-5022VSL manual Operating Other Manufacturers’ Video Equipment, English, Hitachi

Operating Other Manufacturers’ Video Equipment

English

By changing the transmittable signals, you can use the remote control supplied for this unit to operate other manufacturers’ equipment.

•Refer also to the manuals supplied with the other products.

•To operate these components with the remote control, first you need to set the manufacturers’ codes each for TV, CATV converter, VCR and DVD player.

•After replacing batteries of the remote control, set the manufacturers’ codes again.

To change the transmittable signals for operating a TV

1Set TV/CATV selector to TV.

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter manufacturer’s code using buttons 1–9, and 0.

5Release STANDBY/ON TV/CATV.

Now, you can perform the following operations on the TV.

STANDBY/ON	TV/CATV
	: Turn on or off the TV.
TV/VIDEO	: Set the input mode (either TV or VIDEO).
TV VOLUME +/–	: Adjust the volume.
TV/CATV CH +/–	: Change the channels.

After pressing TV SOUND (source selecting button), you can use the following buttons on the TV:

1 – 10, 0, +10 (100+) :Select the channels.

+10 (100+) button will be function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.

Note:

Refer also to the manual supplied with your TV.

6Try to operate your TV by pressing

STANDBY/ON TV/CATV.

When your TV turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

Manufacturers’ codes for TV

Manufacturer	Codes
JVC	01*
Hitachi	10
Magnavox	02
Mitsubishi	03
Panasonic	04, 11
RCA	05
Samsung	12
Sanyo	13
Sharp	06
Sony	07
Toshiba	08
Zenith	09

*Initial setting

To change the transmittable signals for operating a CATV converter

1Set TV/CATV selector to CATV.

2Press and hold STANDBY/ON TV/CATV.

3Press TV SOUND.

4Enter manufacturer’s code using buttons 1–9, and 0.

5Release STANDBY/ON TV/CATV.

Now, you can perform the following operations on the CATV converter.

STANDBY/ON TV/CATV

: Turn on or off the CATV converter.

TV/CATV CH +/– : Change the channels.

After pressing TV SOUND (source selecting button), you can use the following buttons on the CATV converter:

1 – 10, 0, +10 (100+) :Select the channels.

+10 (100+) button will be function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

Refer also to the manual supplied with your CATV converter.

6Try to operate your CATV converter by pressing

STANDBY/ON TV/CATV.

When your CATV converter turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of CATV converter, try each one until the correct one is entered.

Manufacturers’ codes for CATV converter

Manufacturer	Codes
Echostar	01*
General Instrument	02, 03, 04, 05,
	06, 07, 08, 09
Hamlin	16, 17, 18, 19
Pioneer	14, 15
RCA	20
Scient	10, 11
Sony	21
Zenith	12, 13

*Initial setting

28