Asus P5K/EPU manual ASUS Q-Connector system panel

ASUS Q-Connector (system panel)

You can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q- Connector.

1.Connect the front panel cables to the ASUS Q-Connector.

Refer to the labels on the Q-Connector to know the detailed pin definitions, then match them to the respective front panel cable labels.

2.Install the ASUS Q-Connector to the system panel connector, making sure the orientation matches the labels on the motherboard.

3.The front panel functions are now enabled.

The figure shows the Q-Connector properly installed on the motherboard.

2-34 Chapter 2: Hardware information