Max CPUID Value Limit [Disabled]
Setting this item to [Enabled] allows legacy operating systems to boot even without support for CPUs with extended CPUID functions.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set the CPU Ratio Control to [Auto]
Intel(R) SpeedStep (TM) Tech. [Disabled]
Configuration options: [Enabled] [Disabled]
4.4.4Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the
Advanced Chipset Settings
WARMING: Setting wrong values in below sections may cause system to malfunction.
North Bridge Configuration
North Bridge Chipset Configuration
|
|
|
| BIOS SETUP UTILITY |
| Advanced |
|
| |
North Bridge Chipset Configuration |
| |||
|
| |||
Memory Remap Feature | [Enabled] | |||
Initiate Graphic | Adapter | [PEG/PCI] | ||
PEG Port Control |
|
| [Auto] | |
PEG Port Force | x1 | [Disabled] | ||
ASUS C.G.I. Function | [Auto] | |||
Configure North Bridge features.
Options
Disabled
Enabled
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64- bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI]
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
The following item appears only when you set PEG Port Control to [Auto]
Chapter 4: BIOS setup |
