4.USB connectors (10-1 pin USB 78, USB 9 10, USB 11 12)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.
P5K/EPU |
USB1112 | USB910 | USB78 |
USB+5V _USB _USBP12+ GND NC | USB+5V _USB _USBP10+ GND NC | USB+5V _USB _USBP8+ GND NC |
P12- | P10- | P8- |
PIN1 |
|
|
|
|
|
- |
|
| |||
P5K/EPU USB 2.0 connectors |
| P11 P11+ GND | |||
| USB+5V _ | ||||
|
| _ |
|
| |
|
| USB | |||
|
|
| USB | ||
PIN1 |
|
|
|
|
|
- | GND | ||||
|
| _ | |||
| USB+5V _ | ||||
|
|
| P9+ | ||
|
| P9 |
|
| |
|
| USB |
|
| |
|
|
| USB | ||
PIN1 |
|
|
|
|
|
- | GND | ||||
|
| _ | |||
| USB+5V _ | ||||
|
|
| P7+ | ||
|
| P7 |
|
| |
|
| USB |
|
| |
|
|
| USB | ||
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
If your chassis suppots front panel USB ports, you can attach a front panel USB cable to these connectors. Connect the USB cable to ASUS
The USB module cable is purchased separately.
5.IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis.
P5K/EPU |
|
|
| TPA1- GND TPB1- +12V GND | |
IE1394_2 |
| |
P5K/EPU IEEE 1394a connector | PIN 1 | GND +12V |
| ||
TPA1+ TPB1+ | ||
Chapter 2: Hardware information |
