Ericsson LBI-39224 manual Console Channel Configuration dialog box Save, 111

LBI-39224

configuration prior to sending it to the CEC/IMC because a send will send the last configuration that was saved to disk; saving first ensures that the actual CEC/IMC channel configuration will be the same as the channel configuration stored on the CEC/IMC Manager hard disk. To save and send configurations, action is required first in the Console Channel Configuration dialog box and then in the Console Channel Configuration List dialog box.

Console Channel Configuration dialog box

Save

Choose the Save button to perform an immediate save of the currently selected console interface module's channel configuration. Other consoles displayed in the list box located at the top of the dialog box are not saved. This channel configuration is saved on the CEC/IMC Manager's hard disk drive. Any previous channel configuration for the console, if present, is erased and replaced with the current channel configuration. If the CEC/IMC Manager is running remotely or as part of the EDACS Network Manager, this configuration is saved on the CEC/IMC Manager server, typically local to the CEC/IMC; it is not saved at the remote location.

Save As...

Choose the Save As… button to allow the currently selected console interface module channel configurations to be saved as a different console interface module. This function is provided to speed configurations when similar console configurations are required. Upon choosing Save As… a small dialog box, (see Figure 17 on page 3-34), will appear which allows selection of a new console number. Select the desired console number from one of the choices in the drop-down list box, the choices listed are the selected consoles in the Configured/Active Consoles list box. Like Save, Save As… stores channel configuration on the CEC/IMC Manager server.

Close

Choose the Close button to exit the Console Channel Configuration dialog box and return to the Console Channel Configuration List dialog box. If any changes have been made and not saved, you will be prompted (Write Changes to Disk?) to save and exit (Yes), exit without saving (No), or cancel the Close command and remain in the dialog box (Cancel).

3-111