Ericsson LBI-39224 manual LID Logical ID, 157

LBI-39224

Conventional Channel Configuration dialog box displays the first local conventional channel high-level configuration. The displayed configuration is a CEC/IMC Manager-stored configuration, not a CEC/IMC-stored configuration. Channel Selection range = 1 – 255.

To select a different channel, click in the text box, enter (type) the new channel number, and then select elsewhere within the dialog box, or press the Tab key to advance to the next text box. The entire dialog box will update per the CEC/IMC Manager-stored conventional channel configuration for the entered channel.

NOTE

CEC/IMC conventional channel configurations are stored in the CCI and CI Boards. CEC/IMC Manager conventional channel configurations are stored on the CEC/IMC Manager

hard disk drive. No facility exits to read CEC/IMC conventional channel configurations; therefore, to ensure CEC/IMC and CEC/IMC Manager configurations match for the selected channel, a save and send, or send (automatically saves), of any changes must be performed.

As previously mentioned, upon entering the Conventional Channel Configuration dialog box, the first local conventional channel configuration is displayed and this is usually channel 1. However, in a StarGate network the first local conventional channel could be 1, 65, 129, 193, or 1, 33, 65, 97, etc. in accordance with CEC/IMC switch assignment number and the UF_CONV.EXE program configuration. See StarGate Network Conventional Channels on page 3-145 for additional information.

LID (Logical ID)

Every conventional channel requires a unique (unused) LID number assignment from the System Manager's unit database. The LID text box provides entry for this number for the currently selected channel. LID range = 1 – 16382. Default = currently selected channel number. To enter a LID number, select (or Tab to) the text box, type the required LID number, and then select elsewhere within the dialog box or press the Tab key again.

3-157