Ericsson LBI-39224 manual Timer Master Enable/Disable, Multisite Monitor, 198

LBI-39224

Read Disk

Choose the Read Disk button to view the current configuration stored at the CEC/IMC Manager hard disk.

Read CEC/IMC

Choose the Read CEC/IMC button to view the current Multisite configuration at the CEC/IMC.

Close

Choose the Close button to exit the System Options dialog box and return to the CEC/IMC Manager main window. If any changes have been made and not saved, you will be prompted (Write Changes to Disk?) to save and exit (Yes), exit without saving (No), or cancel the Close command and remain in the dialog box (Cancel).

Timer Master Enable/Disable

The Multisite Unit Logout check box in the System Options dialog box provides a master enable/disable function for all multisite unit timers. The timers at the MOM (Monitor Module) must be enabled if the timer-based multisite unit logout option is used. Enable the timers from this dialog box. With the Multisite Unit Logout check box selected (enabled), the multisite unit logout feature operates normally; a unit will be logged out from the multisite call routing process when its timer expires. If the Multisite Unit Logout check box is unselected (disabled), all multisite unit timers stop; therefore, a unit will not be logged out from the multisite call routing process as long as it remains logged into the EDACS trunked site.

Multisite Monitor

The Multisite Channel Monitoring function is available on a limited basis to prevent GSC bus overloading. If the average GSC loading is at an acceptable level, i.e. below the "entry" threshold, the MOM Controller will command all MIM type devices to begin putting secondary drops on the GSC bus. The CAM will intercept the secondary drops and send them to the CAL. The Network Manager will receive multisite channel monitoring information from the CAL and will use this information to display channel drops for secondary sites. Once this function is enabled, the MOM Controller will continue to monitor the GSC loading. If the average loading exceeds the "active" threshold, the MOM Controller will command all MIM type

3-198