Ericsson LBI-39224 manual Tone Controlled Station State Table Mapping Dialog Box, 168

LBI-39224

Figure 36 Tone Controlled Station State Table Mapping Dialog

Box

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

The Tone Controlled Station State Table Mapping (low level configuration) dialog box maps to a state table located on the CI Board for the selected channel. This state table is what the CI Board uses to control the base station. Programming the state tables configures the CEC/IMC to send the tone control signal that matches the conventional base station configuration for the desired function. It will not be possible to program state tables at the CEC/IMC without knowing the corresponding base station's tone control signal configuration. Tone stations' commands are controlled with Secur-It™, function, and hold (PTT only) tones. There is no real definition of current state, so regardless of the "current state" of the station, the same tone will always be generated for a requested command.

The currently selected channel (selected previously in the Conventional Channel Configuration dialog box) is displayed in the read only Channel field with its associated Channel Alias displayed below.

3-168