Ericsson LBI-39224 manual Dvim Channel Configuration Dialog Box, 136

LBI-39224

be changed at the CEC/IMC. Input and output signal levels are set to 0 dBm, ALC is always disabled, and channel signaling is always off. The remaining channel parameters are configured from the DVIM Channel Configuration dialog box, Figure 33. Only those DVIMs which were selected in the DVIM Channel Configuration List dialog box are available for channel configuration. Select the desired DVIM(s) to configure from the Configured/Active DVIM list, or add the desired DVIM(s) from the Configurable DVIM list, if not already listed. Choose Modify to display the DVIM Channel Configuration dialog box. The selected DVIMs are displayed in a list box at the top center of the dialog box.

Figure 33 DVIM Channel Configuration Dialog Box

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

View Current CEC/IMC Manager Channel Configuration

The upper list box in the DVIM Channel Configuration dialog box, labeled "CEC/IMC Manager," displays the current channel configurations stored on the CEC/IMC Manager hard disk for the currently selected DVIM. As the edit fields above this list box are modified for a selected channel, the changes will appear also in this list box for the selected channel.

View Current CEC/IMC Channel Configuration

The lower list box in the DVIM Channel Configuration dialog box, labeled "CEC/IMC," displays the current channel configurations stored at the CEC/IMC for the currently selected DVIM. Information within

3-136