Ericsson LBI-39224 manual T1/E1 Interface Card Auto-configuration, Set Defaults

LBI-39224

should be the same as the configuration stored on the CEC/IMC Manager hard disk. If the CEC/IMC Manager hard disk data was cleared or reset to undesired values, Read MSC followed by Save will restore the CEC/IMC Manager hard disk configuration.

Set Defaults

Choose the Set Defaults button to select the pre-programmed default values from the CEC/IMC Manager hard disk. These values will replace any currently displayed values; however, these "new" values must be saved and sent before they will become the new configuration.

T1/E1 Interface Card Auto-configuration

Subrate ports and channel assignments are auto-configured by the CEC/IMC Manager according to the number of free T1/E1 channels. In Figure 19, the T1/E1 Interface Card Auto-configurationdialog box is shown. Although there are no user configurable fields in this dialog box, the assignment of subrate ports and T1/E1 channels can be viewed on a per card basis in this dialog box. Select the card to view from the drop-down list box in the top left corner.

Figure 19 T1/E1 Interface Card Auto-configuration dialog box

(T1 Line Type Selected)

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

3-42