Ericsson LBI-39224 manual Add

LBI-39224

Configurable Sites:

The Configurable Sites list box displays all unconfigured site-type interface modules. If a CTIM appears in this box, no channel configuration exists at the CEC/IMC Manager and no active Controller Board control data link exists at the CEC/IMC for the corresponding site assignment number. Any number of these available CTIMs may be selected at one time to be added to the Configured/Active Sites list box for configuration.

Configured/Active Sites:

The Configured/Active Sites list box displays CTIMs which have been added but not yet channel-configured, CTIMs which have had previous channel configurations performed, and CTIMs which have been previously channel-configured and have an active Controller Board control data link. Before any site-type interface module can be channel- configured, it must be listed in the Configured/Active Sites list box. Any number of the available CTIMs in this list may be selected at one time for modification in the Site Channel Configuration dialog box. All selected CTIMs in this list will also be listed in the "Save As… " dialog box that is accessed from the Site Channel Configuration dialog box. If necessary, refer to Configured/Active Sites Prefix Definitions, Table 1, on page 3-25 for an explanation of the prefixes.

Add

Choose the Add button to move a selected site from the Configurable Sites list box and "add" it to the Configured/Active Sites list box where it can be configured. If upon adding a site, a configuration data file exists on the CEC/IMC Manager's hard disk drive from a previous add and delete, the site will be added to the Configured/Active Sites list box with its configuration data file (with a ** prefix). This previous configuration may be modified, saved, and sent as needed.

Modify

Choose the Modify button to display the Audio Interface Type dialog box. Select Audio Board to activate the Site Channel Configuration dialog box, T1/E1 Interface is not supported for CTIMs. Audio Board configuration is discussed in detail in the subsequent section.

Delete

Choose the Delete button to remove ("delete") a selected configured or unconfigured CTIM from the Configured/Active Sites list box to the Configurable Sites list box. Configured-and-active CTIMs cannot be "deleted." This delete function does not remove channel configuration

3-92