Ericsson LBI-39224 Deactivate, Console Call Trigger, Error/Warning Trigger, Error Trigger, 184

LBI-39224

Maestro uses Alt+F1 - Alt+F8 (press and hold the Alt key and then press the F1 - F8 key). The C3 Modular console uses the ALARM 1 - 4 and AUX 1 - 4 keys for the same purpose. Each event can be specified to either deactivate upon release of the key (momentary) or toggle on each subsequent key press (hold).

Deactivate

For a toggled event (changes state with each key press) key presses from different consoles can toggle the current state. For example, console 1 may toggle the event active and console 6 may toggle the event back to the inactive state. For a momentary event release of the key press (at the console) will deactivate the event back to the inactive state. Select either Toggle or Momentary.

Console Call Trigger

A console call trigger will activate an output event when the specified condition is detected at the Console Interface Module (CIM). The event deactivates when the condition is no longer present. The three possible settings are:

Station Busy − Active whenever any transmit or receive audio is present at the console.

Station Select Busy − Active whenever any transmit or receive select audio is present at the console.

Emergency − Active whenever emergency tone is present at the console. This event will deactivate if the "Alarm Reset" function is used at the console to clear the emergency tone, but leave the emergency active.

Error/Warning Trigger

An Error/Warning trigger will activate an output event when an error or warning occurs at the CEC/IMC.

Error Trigger

An error trigger is similar to a warning trigger except that it may be defined to automatically deactivate when the error condition clears. The MOM will keep track of the number of the specified errors that are active and will deactivate the output when all have cleared, if the Deactivate On Error Clear check box is selected. Error events may also be defined to require manual deactivation, as for warning alarms. If Error Alarm (any) is specified as the trigger, the output will activate on receipt of any error message at the MOM. The output must be manually deactivated.

3-184