Ericsson LBI-39224 manual Ctim Audio Board Channel Configuration, Audio Interface Type

LBI-39224

files from the CEC/IMC Manager's hard disk drive. Therefore, if the deleted CTIM is subsequently added back to the Configured/Active Sites list box via the Add button, the previous channel configuration is not lost (this configuration data must be saved in the Site Channel Configuration dialog box before it can be resent to the CEC/IMC).

Close

Choose the Close button to exit the Site Channel Configuration List dialog box and return to the CEC/IMC Manager main window. Any "**" (unconfigured and unsaved) CTIMs appearing in the Configured/Active Sites list box will be removed and returned to the Configurable Sites list box.

CTIM Audio Board Channel Configuration

This section describes configurations for channels within Audio Board- equipped site-type interface modules. All channel parameters are configured from the Site Channel Configuration dialog box. Only

those CTIMs which were selected in the Site Channel Configuration List dialog box are available for channel configuration. Select the desired site-type interface modules to configure from the Configured/Active Sites list, or add the desired modules from the Configurable Sites list, if not already listed, as

described earlier.	Choose	Modify	to	display	the
Audio Interface Type	dialog box,	select the	Audio	Board	option

button, (T1/E1 Interface Board is not supported for CTIM) then choose OK to display the Site Channel Configuration dialog box. The selected CTIMs are displayed in a list box at the top center of the dialog box.

3-93