SMC Networks TigerSwitch manual Configuring the Switch, Using the Web Interface

Models: TigerSwitch

1 518
Download 518 pages 30.84 Kb
Page 51
Image 51

CHAPTER 3 CONFIGURING THE SWITCH

Using the Web Interface

This switch provides an embedded HTTP Web agent. Using a Web browser you can configure the switch and view statistics to monitor network activity. The Web agent can be accessed by any computer on the network using a standard Web browser (Internet Explorer 5.0 or above, or Netscape Navigator 6.2 or above).

Note: You can also use the Command Line Interface (CLI) to manage the switch over a serial connection to the console port or via Telnet. For more information on using the CLI, refer to Chapter 4 “Command Line Interface.”

Prior to accessing the switch from a Web browser, be sure you have first performed the following tasks:

1.Configure the switch with a valid IP address, subnet mask, and default gateway using an out-of-band serial connection, BOOTP or DHCP protocol. (See “Setting an IP Address” on page 2-8.)

2.Set user names and passwords using an out-of-band serial connection. Access to the Web agent is controlled by the same user names and passwords as the onboard configuration program. (See “Setting Passwords” on page 2-7.)

3.After you enter a user name and password, you will have access to the system configuration program.

3-1

Page 51
Image 51
SMC Networks TigerSwitch manual Configuring the Switch, Using the Web Interface