SMC Networks TigerSwitch manual 111

CONFIGURING THE SWITCH

CLI – This example sets the 802.1X parameters on port 2. For a description of the additional fields displayed in this example, see “show dot1x” on page 4-115.

Console(config)#interface ethernet 1/2						4-146
Console(config-if)#dot1x port-control auto						4-111
Console(config-if)#dot1x re-authentication						4-113
Console(config-if)#dot1x max-req 5						4-110
Console(config-if)#dot1x timeout quiet-period 30						4-114
Console(config-if)#dot1x timeout re-authperiod 1800						4-114
Console(config-if)#dot1x timeout tx-period 40						4-115
Console(config-if)#end
Console#show dot1x						4-115
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name	Status		Operation Mode	Mode	Authorized
1/1	disabled		Single-Host	ForceAuthorized		n/a
1/2	enabled		Single-Host	auto		yes
.
.
.
1/26	disabled		Single-Host	ForceAuthorized		n/a
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Enable
reauth-period:		1800
quiet-period:		30
tx-period:		40
supplicant-timeout:			30
server-timeout:		10
reauth-max:		2
max-req:		5
Status			Authorized
Operation mode			Single-Host
Max count			5
Port-control			Auto
Supplicant			00-00-e8-49-5e-dc
Current Identifier			3
Authenticator State Machine
State			Authenticated
Reauth Count			0
Backend State Machine
State			Idle
Request Count			0
Identifier(Server)			2
Reauthentication State Machine
State			Initialize
.
.

.

802.1X is disabled on port 1/26 Console#

3-72