SMC Networks TigerSwitch manual 227, Show queue mode, Show queue bandwidth, Show queue cos-map 4

PRIORITY COMMANDS

Example

The following example shows how to map CoS values 0, 1 and 2 to egress queue 0, value 3 to egress queue 1, values 4 and 5 to egress queue 2, and values 6 and 7 to egress queue 3:

Console(config)#interface ethernet					1/1
Console(config-if)#queue				cos-map 0	0	1	2
Console(config-if)#queue				cos-map 1	3
Console(config-if)#queue				cos-map 2	4	5
Console(config-if)#queue				cos-map 3	6	7
Console(config-if)#end
Console#show queue		cos-map ethernet 1/1
Information of Eth		1/1
CoS Value	: 0	1 2	3	4 5 6 7
Priority Queue: 0		0 0	1	2 2 3 3
Console#

Related Commands

show queue cos-map (4 -228)

show queue mode

This command shows the current queue mode.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#show queue mode

Queue mode: wrr

Console#

show queue bandwidth

This command displays the weighted round-robin (WRR) bandwidth allocation for the four priority queues.

Default Setting

None

4-227