SMC Networks TigerSwitch manual 188, Specifying Static Interfaces for a Multicast Router

CONFIGURING THE SWITCH

CLI – This example shows that Port 11 has been statically configured as a port attached to a multicast router.

Console#show	ip igmp snooping	mrouter vlan 1	4-248
VLAN M'cast	Router Port Type
---- ------------------ -------

1Eth 1/11 Static

Console#

Specifying Static Interfaces for a Multicast Router

Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the IGMP querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups supported by the attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the switch.

Command Attributes

•Interface – Activates the Port or Trunk scroll down list.

•VLAN ID – Selects the VLAN to propagate all multicast traffic coming from the attached multicast router.

•Unit – Stack unit. (Range: 1-8)

•Port or Trunk – Specifies the interface attached to a multicast router.

3-188