SMC Networks TigerSwitch manual Setting Passwords

BASIC CONFIGURATION

3.At the Password prompt, also enter “admin.” (The password characters are not displayed on the console screen.)

4.The session is opened and the CLI displays the “Console#” prompt indicating you have access at the Privileged Exec level.

Setting Passwords

Note: If this is your first time to log into the CLI program, you should define new passwords for both default user names using the “username” command, record them and put them in a safe place.

Passwords can consist of up to 8 alphanumeric characters and are case sensitive. To prevent unauthorized access to the switch, set the passwords as follows:

1.Open the console interface with the default user name and password “admin” to access the Privileged Exec level.

2.Type “configure” and press <Enter>.

3.Type “username guest password 0 password,” for the Normal Exec level, where password is your new password. Press <Enter>.

4.Type “username admin password 0 password,” for the Privileged Exec level, where password is your new password. Press <Enter>.

Note: ‘0’ specifies the password in plain text, ‘7’ specifies the password in encrypted form.

Username: admin

Password:

CLI session with the Stackable Intelligent Switch is opened. To end the CLI session, enter [Exit].

Console#configure

Console(config)#username guest password 0 [password]

Console(config)#username admin password 0 [password]

Console(config)#

2-7