SMC Networks TigerSwitch manual 114, Rate Limit Configuration

CONFIGURING THE SWITCH

CLI - This example sets and displays Fast Ethernet and Gigabit Ethernet granularity.

Console(config)#rate-limit	fastethernet granularity 512	4-162
Console(config)#rate-limit	gigabitethernet granularity 33300	4-162
console#show rate-limit		4-163
Fast ethernet granularity:	512

Gigabit ethernet granularity: 33300

Console#

Rate Limit Configuration

Use the rate limit configuration pages to apply rate limiting.

Command Usage

•Input and output rate limit can be enabled or disabled for individual interfaces.

Command Attributes

•Port/Trunk – Displays the port number.

•Rate Limit Status – Enables or disables the rate limit. (Default: Disabled)

•Rate Limit Level – Sets the rate limit level. (Range: 1-255: Default: 255)

Note: Actual rate limit = Rate Limit Level * Granularity

3-114