ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

LDAP Server

A Lightweight Directory Access Protocol (LDAP) server allows a user to query and modify directory services that run over TCP/IP. For example, clients can query email addresses, contact information, and other service information using an LDAP server. For each VLAN, you can specify an LDAP server and a search base that defines the location in the directory (that is, the directory tree) from which the LDAP search begins.

Configure a VLAN Profile

For each VLAN on the wireless VPN firewall, you can configure its profile, port membership, LAN TCP/IP settings, DHCP options, DNS server, and inter-VLAN routing capability.

To add a VLAN profile:

1.Select Network Configuration > LAN Setup. In the upper right of the screen, the IPv4 radio button is selected by default. The LAN submenu tabs display, with the LAN Setup screen in view, displaying the IPv4 settings. (The following figure contains some VLAN profiles as an example.)

Note: For information about how to manage VLANs, see Port-Based VLANs on page 55. The following information describes how to configure a VLAN profile.

Figure 31.

LAN Configuration

59

Page 59
Image 59
NETGEAR FVS318N manual Configure a Vlan Profile, Ldap Server,  To add a Vlan profile