ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 26. Add IPv6 Static Routing screen settings (continued)

Setting

Description

 

 

Interface

From the drop-down list, select the physical or virtual network interface (WAN1,

 

sit0 Tunnel, LAN, or DMZ interface) through which the route is accessible.

IPv6 Gateway

The gateway IPv6 address through which the destination host or network can be

 

reached.

 

 

Metric

The priority of the route. Select a value between 2 and 15. If multiple routes to the

 

same destination exist, the route with the lowest metric is used.

 

 

5.Click Apply to save your settings. The new static route is added to the List of IPv6 Static Routes table.

To edit an IPv6 static route:

1.On the Static Routing screen for IPv6 (see Figure 52 on page 104), click the Edit button in the Action column for the route that you want to modify. The Edit IPv6 Static Routing screen displays. This screen is identical to the Add IPv6 Static Routing screen.

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

To delete one or more routes:

1.On the Static Routing screen for IPv6 (see Figure 52 on page 104), select the check box to the left of each route that you want to delete, or click the Select All table button to select all routes.

2.Click the Delete table button.

LAN Configuration

105

Page 105
Image 105
NETGEAR FVS318N manual  To edit an IPv6 static route, 105