ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 68. SSL VPN Client screen settings for IPv4 and IPv6 (continued)

Setting

Description

 

 

 

Secondary DNS Server

The IP address of the secondary DNS server that is assigned to the VPN

 

tunnel clients. This setting is optional.

 

 

 

 

Client Address

The first IP address of the IPv4 address range that you

 

Range Begin

want to assign to the VPN tunnel clients. By default, the

IPv4 screen only

 

first IPv4 address is 192.168.251.1.

 

 

Client Address

The last IP address of the IPv4 address range that you

 

 

Range End

want to assign to the VPN tunnel clients. By default, the

 

 

last IPv4 address is 192.168.251.254.

 

 

 

 

Client IPv6

The first IP address of the IPv6 address range that you

 

Address Range

want to assign to the VPN tunnel clients. By default, the

IPv6 screen only

Begin

first IPv6 address is 4000::1.

 

 

Client IPv6

The last IP address of the IPv6 address range that you

 

 

Address Range

want to assign to the VPN tunnel clients. By default, the

 

End

last IPv6 address is 4000::200.

 

 

 

4.Click Apply to save your settings. VPN tunnel clients are now able to connect to the wireless VPN firewall and receive a virtual IP address in the client address range.

Add Routes for VPN Tunnel Clients

The VPN tunnel clients assume that the following networks are located across the VPN-over-SSL tunnel:

The subnet that contains the client IP address (that is, PPP interface), as determined by the class of the address (Class A, B, or C).

Subnets that are specified in the Configured Client Routes table on the SSL VPN Client screen.

If the assigned client IP address range is in a different subnet from the local network, or if the local network has multiple subnets, or if you select split-tunnel operation, you need to define client routes.

To add an SSL VPN tunnel client route:

1.Select VPN > SSL VPN > SSL VPN Client. The SSL VPN Client screen for IPv4 displays (see Figure 166 on page 276).

2.Specify the IP version for which you want to add a route:

IPv4. In the upper right of the screen, the IPv4 radio button is already selected by default. Go to Step 3.

IPv6. Select the IPv6 radio button. The SSL VPN Client screen displays the IPv6 settings (see Figure 167 on page 277).

Virtual Private Networking Using SSL Connections

278

Page 278
Image 278
NETGEAR FVS318N manual Add Routes for VPN Tunnel Clients,  To add an SSL VPN tunnel client route, 278