NETGEAR manual ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

•2nd level: Configuration menu links. The configuration menu links in the gray bar (immediately below the main navigation menu bar) change according to the main navigation menu link that you select. When you select a configuration menu link, the letters are displayed in white against a gray background.

•3rd level: Submenu tabs. Each configuration menu item has one or more submenu tabs that are listed below the gray menu bar. When you select a submenu tab, the text is displayed in white against a blue background.

•Option arrows. If there are additional screens for the submenu item, links to the screens display on the right side in blue letters against a white background, preceded by a white arrow in a blue circle.

•IP radio buttons. The IPv4 and IPv6 radio buttons let you select the IP version for the feature to be configured onscreen. There are four options:

-Both buttons are operational. You can configure the feature onscreen for IPv4 functionality or for IPv6 functionality. After you have correctly configured the feature for both IP versions, the feature can function with both IP versions simultaneously.

-The IPv4 button is operational but the IPv6 button is disabled. You can configure the feature onscreen for IPv4 functionality only.

-The IPv6 button is operational but the IPv4 button is disabled. You can configure the feature onscreen for IPv6 functionality only.

-Both buttons are disabled. IP functionality does not apply.

The bottom of each screen provides action buttons. The nature of the screen determines which action buttons are shown. The following figure shows an example:

Figure 7.

Any of the following action buttons might display onscreen (this list might not be complete):

•Apply. Save and apply the configuration.

•Reset. Reset the configuration to the previously saved configuration.

•Test. Test the configuration.

•Auto Detect. Enable the wireless VPN firewall to detect the configuration automatically and suggest values for the configuration.

•Cancel. Cancel the operation.

When a screen includes a table, table buttons display to let you configure the table entries. The nature of the screen determines which table buttons are shown. The following figure shows an example:

Figure 8.

Introduction

23