NETGEAR FVS318N manual 147

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

To access the DMZ WAN Rules screen for IPv6 or to change existing IPv6 rules:

1.Select Security > Firewall > DMZ WAN Rules. The Firewall submenu tabs display with the DMZ WAN Rules screen for IPv4 in view.

2.In the upper right of the screen, select the IPv6 radio button. The DMZ WAN Rules screen displays the IPv6 settings. (The following figure contains examples.)

Figure 70.

To change an existing outbound or inbound service rule, in the Action column to the right of the rule, click one of the following table buttons:

•Up. Moves the rule up one position in the table rank.

•Down. Moves the rule down one position in the table rank.

•Edit. Allows you to make any changes to the definition of an existing rule. Depending on your selection, one of the following screens displays:

-Edit DMZ WAN Outbound Service screen for IPv6 (identical to Figure 72 on page 149)

-Edit DMZ WAN Inbound Service screen for IPv6 (identical to Figure 74 on page 152)

To enable, disable, or delete one or more IPv4 or IPv6 rules:

1. Select the check box to the left of each rule that you want to enable, disable, or delete, or click the Select All table button to select all rules.

2. Click one of the following table buttons:

•Enable. Enables the rule or rules. The ! status icon changes from a gray circle to a green circle, indicating that the selected rule or rules are enabled. (By default, when a rule is added to the table, it is automatically enabled.)

Firewall Protection

147