NETGEAR FVS318N manual 211

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 124.

b.Specify the default lifetimes in seconds:

•Authentication (IKE), Default. The default lifetime value is 3600 seconds. Change this setting to 28800 seconds to match the configuration of the wireless VPN firewall.

•Encryption (IPSec), Default. The default lifetime value is 1200 seconds. Change this setting to 3600 seconds to match the configuration of the wireless VPN firewall.

9.Click Apply to use the new settings immediately, and click Save to keep the settings for future use.

The VPN client configuration is now complete.

Instead of using the wizard on the VPN client, you can also manually configure the VPN client, which is explained in the following section.

Manually Create a Secure Connection Using the NETGEAR VPN Client

Note: Perform these tasks from a computer that has the NETGEAR

ProSafe VPN Client installed.

To manually configure a VPN connection between the VPN client and the wireless VPN firewall, create authentication settings (phase 1 settings), create an associated IPSec configuration (phase 2 settings), and then specify the global parameters.

Virtual Private Networking Using IPSec and L2TP Connections

211