ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

To edit an IPv4 static route:

1.On the Static Routing screen for IPv4 (see Figure 49 on page 98), click the Edit button in the Action column for the route that you want to modify. The Edit Static Route screen displays. This screen is identical to the Add Static Route screen (see the previous figure).

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

To delete one or more routes:

1.On the Static Routing screen for IPv4 (see Figure 49 on page 98), select the check box to the left of each route that you want to delete, or click the Select All table button to select all routes.

2.Click the Delete table button.

Configure the Routing Information Protocol

Routing Information Protocol (RIP), RFC 2453, is an Interior Gateway Protocol (IGP) that is commonly used in internal IPv4 networks (LANs). RIP enables a router to exchange its routing information automatically with other routers, to dynamically adjust its routing tables, and to adapt to changes in the network. RIP is disabled by default. RIP does not apply to IPv6.

To enable and configure RIP:

1.Select Network Configuration > Routing. In the upper right of the screen, the IPv4 radio button is selected by default. The Static Routing screen displays the IPv4 settings (see Figure 49 on page 98).

2.Click the RIP Configuration option arrow to the right of the Static Routing submenu tab. The RIP Configuration screen displays. (The following figure contains some examples.)

LAN Configuration

100

Page 99 Page 101
Page 100
Image 100
NETGEAR FVS318N Configure the Routing Information Protocol,  To edit an IPv4 static route,  To delete one or more routes
Page 99 Page 101
Top Page Image Contents