NETGEAR FVS318N manual  To edit an Isatap tunnel, Add Isatap Tunnel screen settings

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 25.

2.Click the Add table button under the List of Available ISATAP Tunnels table. The Add ISATAP Tunnel screen displays:

Figure 26.

3.Specify the tunnel settings as explained in the following table.

Table 9. Add ISATAP Tunnel screen settings

Setting	Description
ISATAP Subnet Prefix	The IPv6 prefix for the tunnel.
Local End Point	From the drop-down list, select the type of local address:
Address	• LAN. The local endpoint address is the address of the default VLAN.
	• Other IP. The local endpoint address is another LAN IP address that you need
	to specify in the IPv4 Address fields.
IPv4 Address	If you select Other IP from the Local End Point Address drop-down list, enter the
	IPv4 address.

4.Click Apply to save your changes.

To edit an ISATAP tunnel:

1.On the ISATAP Tunnels screen, click the Edit button in the Action column for the tunnel that you want to modify. The Edit ISATAP Tunnel screen displays. This screen is identical to the Add ISATAP Tunnel screen.

IPv4 and IPv6 Internet and Broadband Settings

48