ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

IPv6 WAN Port Status

To view the IPv6 status of the WAN port:

1.Select Network Configuration > WAN Settings > Broadband ISP Settings (IPv6). The Broadband ISP Settings (IPv6) screen displays (see Figure 19 on page 40).

2.Click the Status option arrow in the upper right of the screen to display the Connection Status pop-up screen. (The following figure shows a dynamic IP address configuration.)

Figure 221.

The type of connection determines the information that is displayed on the Connection Status screen. The screen can display the information that is described in the following table:

Table 91. Connection Status screen information for an IPv6 connection

Item

Description

 

 

Connection Time

The period that the wireless VPN firewall has been connected through the

 

WAN port.

 

 

IPv6 Connection Type

The connection type can be either Dynamic IP (DHCP), Static, or PPPoE.

 

 

IPv6 Connection Status

The connection status can be either Connected or Disconnected.

 

 

IP Address

The IPv6 addresses that were automatically detected or that you

 

configured on the Broadband ISP Settings (IPv6) screen.

Gateway

Note: The Gateway and DNS Server (IPv6) fields apply only to static IPv6

 

 

and PPPoE IPv6 connections.

Primary DNS Server (IPv6)

Note: For more information, see Use a DHCPv6 Server to Configure an

 

Secondary DNS Server (IPv6)

IPv6 Internet Connection on page 39 and Configure a Static IPv6 Internet

 

Connection on page 41.

 

 

Click Disconnect to disconnect the connection; click Connect to establish the connection.

Monitor System Access and Performance

369

Page 369
Image 369
NETGEAR FVS318N manual IPv6 WAN Port Status,  To view the IPv6 status of the WAN port, 369, Connection on