NETGEAR FVS318N manual SSL VPN Client screen settings for IPv4 and IPv6, 277

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

•IPv6. Select the IPv6 radio button. The SSL VPN Client screen displays the IPv6 settings (the following screen shows some examples).

Figure 167. SSL VPN Client screen for IPv6

3.Complete the settings as explained in the following table:

Table 68. SSL VPN Client screen settings for IPv4 and IPv6

Setting	Description
Client IP Address Range
Enable Full Tunnel Support	Select this check box to enable full-tunnel support. If you leave this check box
	cleared (which is the default setting), full-tunnel support is disabled but
	split-tunnel support is enabled, and you need to add client routes (see Add
	Routes for VPN Tunnel Clients on page 278).
	Note: When full-tunnel support is enabled, client routes are not operable.
DNS Suffix	A DNS suffix to be appended to incomplete DNS search strings. This setting
	is optional.
Primary DNS Server	The IP address of the primary DNS server that is assigned to the VPN tunnel
	clients. This setting is optional.
	Note: If you do not assign a DNS server, the DNS settings remain
	unchanged in the SSL VPN client after a VPN tunnel has been established.

Virtual Private Networking Using SSL Connections

277