NETGEAR FVS318N manual Defined addresses settings for IPv6, 309

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 188.

5.In the Defined Addresses Status section of the screen, select one of the following radio buttons:

•Deny Login from Defined Addresses. Deny logging in from the IP addresses in the Defined Addresses table.

•Allow Login only from Defined Addresses. Allow logging in from the IP addresses in the Defined Addresses table.

6.Click Apply to save your settings.

7.In the Add Defined Addresses section of the screen, add an address to the Defined Addresses table by entering the settings as explained in the following table:

Table 76. Defined addresses settings for IPv6

Setting	Description
Source Address Type	Select the type of address from the drop-down list:
	• IP Address. A single IPv6 address.
	• IP Network. A subnet of IPv6 addresses. You need to enter a prefix length in the
	Prefix Length field.
Network Address / IP	Depending on your selection from the Source Address Type drop-down list, enter
Address	the IP address or the network address.
Prefix Length	For a network address, enter the prefix length (0–64).
	Note: By default, a single IPv6 address is assigned a prefix length of 64.

8.Click the Add table button. The address is added to the Defined Addresses table.

Manage Users, Authentication, and VPN Certificates

309