A
6F22
B
3
2
1 2,3
10
BACKUP FUNCTION | English |
|
If the AC power supply is interrupted, the clock display goes off and the alarm setting is canceled. To back up the clock and alarm, insert a 6F22 battery in the battery compartment on the rear of the unit. → A
• The backup battery is not for radio reception.
Note
The backup function lasts about 10 minutes. Set the clock again if 10 minutes have passed after a power interruption.
Replacing the battery
Replace the battery with a new one if the clock display flashes or the alarm timer does not work properly when you connect the AC power cord again.
Note on battery
•When you are not going to use the unit for a long period of time, remove the battery to prevent possible electrolyte leakage.
•To prevent the risk of electrolyte leakage or explosions, never recharge the battery, apply heat to it, or take it apart.
SETTING THE CLOCK → B
1Connect the AC power cord to a wall outlet (a).
The clock display begins flashing. If the clock is not displayed correctly, disconnect the AC cord and remove the backup battery if inserted. Then, connect the AC cord and insert the backup battery again.
2While holding down aSET, press gHOUR to set the hour.
Holding down both buttons changes the hour faster.
7:00 7:00 a.m.
•7:00 7:00 p.m.
3While holding down aSET, press hMIN to set the minute.
Holding down both buttons changes the minutes faster.
