5Remove the system battery.
a Support the battery connector by pressing down firmly on the positive side of the connector.
b Press the battery toward the positive side of the connector and lift it up out of the securing tabs at the negative side of the connector.
Figure 3-33. Replacing the System Battery
1
2
|
| 3 |
|
1 | positive side of battery connector | 2 | system battery |
3 | negative side of battery connector |
|
|
6Install the new system battery.
a Support the battery connector by pressing down firmly on the positive side of the connector.
b Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector.
c Press the battery straight down into the connector until it snaps into place.
7Replace the fan bracket. See "Replacing the Fan Bracket."
8Close the system. See "Closing the System."
9Reconnect the system to the electrical outlet and turn the system on, including any attached peripherals.
10Enter the System Setup program to confirm that the battery is operating properly. See "Entering the System Setup Program."
142
