Dell R710 owner manual Installing System Components

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.

2Open the system. See "Opening the System."

3Remove the blank tray from the flex bay by squeezing the blue release tabs at the back of the tray and pushing the tray out of the system.

4Using a Phillips screwdriver, disassemble the blank tray:

•For 2.5-inch hard-drive systems, remove the slide rails from the tray.

•For 3.5-inch hard-drive systems, remove the blank from the tray. See Figure 3-18.

5For a SCSI tape drive, route the SCSI data and power cables through the flex bay and through the tray and connect the cables to the tape backup unit.

108

Installing System Components