Dell R710 Sata port, Device auto, Seek error, Seek operation, Shutdown failure, Amount, Changed

Table 1-2. System Messages (continued)

Message	Causes	Corrective Actions
SATA port x	The drive connected to the	Replace the faulty drive.
device auto-	specified SATA port is faulty.
sensing error
SATA port x
device
configuration
error
SATA port x
device error
Sector not found	Faulty hard drive, USB	Replace the USB medium or
Seek error	device, or USB medium.	device. Ensure that the USB
		or SAS backplane cables are
Seek operation
		properly connected. See
failed
		"Troubleshooting a USB
		Device" or "Troubleshooting
		a Hard Drive" for the
		appropriate drive(s) installed
		in your system.
Shutdown failure	General system error.	See "Getting Help."
The amount of	Memory has been added or	If memory has been added or
system memory has	removed or a memory	removed, this message is
changed	module may be faulty.	informative and can be
		ignored. If memory has not
		been added or removed,
		check the SEL to determine
		if single-bit or multi-bit
		errors were detected and
		replace the faulty memory
		module. See
		"Troubleshooting System
		Memory."

About Your System

47