Dell R710 owner manual 151

cPush the system board toward the back of the chassis until the blue retention pin locks into place.

6If applicable, transfer the NIC hardware key.

7Replace the riser boards. See "Replacing Expansion-Card Riser 1" and "Replacing Expansion-Card Riser 2."

8Reinstall the integrated storage controller card. See "Installing the Integrated Storage Controller Card."

9If applicable, reconnect the RAID battery cable to the storage controller card.

10Reconnect all power and interface cables (see Figure 6-2 for the locations of the connectors on the system board).

11If removed, reinstall the SAS backplane and all hard drives. See "System Board."

12Install all expansion cards. See "Installing an Expansion Card."

13If applicable, transfer the iDRAC6 Enterprise card to the new system board. See "Installing an iDRAC6 Enterprise Card."

14Replace the fan bracket. See "Replacing the Fan Bracket."

15Replace the cooling shroud. See "Installing the Cooling Shroud."

16Close the system. See "Closing the System."

17Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing System Components

151