Dell R710 owner manual Removing or Installing a USB Memory Key Control panel board, USB memory key

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: Maximum dimensions supported for the USB memory key are 24-mm (.94-in) wide, 79-mm (3.11-in) long, and 8.6-mm (.33-in) tall.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System."

3Locate the USB connector on the control panel. See Figure 3-9.

4Insert the USB memory key into the USB connector. See Figure 3-9.

Figure 3-9. Removing or Installing a USB Memory Key

1 3

2

1	control panel board	2 USB memory key connector
3	USB memory key

5Close the system. See "Closing the System."

6Reconnect the system to power and restart the system.

92

Installing System Components