Dell R710 E1313 Fan, Redundancy, Lost. Check, Fans, E1410 System Fatal, Detected, CPU heatsink

Table 1-1. LCD Status Messages (continued)

Code	Text	Cause	Corrective Actions
E1313	Fan	The system is no longer fan	Check LCD for additional
	redundancy	redundant. Another fan	scrolling messages. See
	lost. Check	failure would put the	"Troubleshooting a Fan."
	fans.	system at risk of over-
		heating.
E1410	System Fatal	A fatal system error has	Check LCD for additional
	Error	been detected.	scrolling messages.
	detected.		Remove AC power to the
			system for 10 seconds and
			restart the system.
			If the problem persists,
			see "Getting Help."
E1414	CPU # temp	Specified processor is out of	Ensure that the processor
	exceeding	acceptable temperature	heat sinks are properly
	range. Check	range.	installed. See
	CPU heatsink.		"Troubleshooting the
			Processor(s)" and
			"Troubleshooting System
			Cooling Problems."
E1418	CPU # not	Specified processor is	Ensure that the specified
	detected.	missing or bad, and the	processor is properly
	Check CPU is	system is in an unsupported	installed. See
	seated	configuration.	"Troubleshooting the
	properly.		Processor(s)."
E141C	Unsupported	Processors are in an	Ensure that your
	CPU configur-	unsupported configuration. processors match and
	ation. Check		conform to the type
	CPU or BIOS		described in the processor
	revision.		technical specifications
			outlined in your system’s
			Getting Started Guide.
E141F	CPU #	The system BIOS has	Remove AC power to the
	protocol	reported a processor	system for 10 seconds and
	error. Power	protocol error.	restart the system.
	cycle AC.		If the problem persists,

see "Getting Help."

26

About Your System