Panasonic SDR-H80P, SDR-H90P Others, Recommend Data Back Up Periodically, Hdd Backup Recommended

Others

Indications 2 Messages

RECOMMEND DATA BACK UP PERIODICALLY.

The capacity of the HDD is limited. We recommend backing up important recorded data periodically to a PC, etc., to protect it. This message does not indicate that there is a problem with this unit.

HDD BACKUP RECOMMENDED.

There is a possible problem with the HDD. Immediately copy the data on the HDD to a PC, etc., and then have the unit repaired.

THIS CARD CANNOT RECORD IN VIDEO MODE.

An 8 MB or 16 MB SD card has been inserted in video recording mode.

CHECK CARD.

This card is not compatible or it cannot be recognized by the unit.

ERROR OCCURRED. RECORDING IS STOPPED.

≥When using an SD card that can be used for motion picture recording (l 22)

When this message appears, it is recommended that you format the SD card being used. (l 71) When an SD card is formatted, all the data recorded on it will be deleted. Back up the data on the SD card to a PC, etc. before formatting the SD card.

≥When using any other card

Use a Panasonic SD card or another SD card which can be used to record motion pictures. (l 22)

THIS BATTERY CANNOT BE USED.

Use a battery that is compatible with this unit. (l 16)

You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied AC adaptor. (l 19)

If using a Panasonic battery compatible with this unit (l 16), remove the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair. Detach the power and contact consumer support (l 119, 120). Do not attempt to repair it by yourself.

EXIT THE MENU THEN CHANGE TO MANUAL MODE.

CANCEL MAGICPIX MODE.

You are attempting to use a function that cannot be used simultaneously.

SHAKE OR DROP HAS BEEN DETECTED. FAILED OPERATION. PLEASE WAIT A WHILE.

The unit has detected that it is being dropped so the operation has stopped.

CANNOT OPERATE. TEMPERATURE IS HIGH. PLEASE TURN OFF AND WAIT A WHILE.

The internal temperature of this unit is high so it cannot be operated. Turn off the power, wait until the temperature falls and then turn on the power again.

98

LSQT1449