Kyocera 3035 manual Changing the energy-saving mode, Energy Saver key setting, Low power mode

Section 7 COPIER MANAGEMENT FUNCTIONS

●Changing the energy-saving mode

Perform the following procedure to change the energy-saving mode (the Low power mode or the Sleep mode) that will be entered into when the [Energy Saver] key is pressed.

1Display the “Machine default” screen.

(See “(2) Accessing the machine default settings” on page 7-41.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Energy Saver key setting” in the settings list on the left side of the touch panel and then touch the “Change #”

key.

The “Energy Saver key setting” screen will be displayed. Inch specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Date/Time	2001/10/30 14:02
Time difference	GMT+08:00	Down
Management code change	5000
Auto sleep	On
Energy Saver key setting	Low power mode	Change #

Metric specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Date/Time	30/10/'01 14:02
Time difference	GMT+08:00	Down
Change MGMT code with #	5000
Auto sleep	On
Energy Saver key setting	Low power mode	Change #
Default setting

3Touch the “Low power mode” key or the “Sleep mode” key, as desired.

Inch specifications

Energy Saver key setting Back Close

When pressing Energy Saver key, state can be set.

Low power mode

Sleep mode

Default setting - Machine default

Metric specifications

Energy Saver key setting Back Close

When pressing Energy Saver key, state can be set.

Low power mode

Sleep mode

Default setting - Machine default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-58