Kyocera 3035 manual Silent mode ON/OFF

Section 7 COPIER MANAGEMENT FUNCTIONS

●Silent mode ON/OFF

Perform the following procedure to set whether or not to use the silent mode which shortens the length of time that the laser data writing motor continues to spin after each copy job is finished. Turn the silent mode ON if the noise of the motor bothers you in any way.

1Display the “Machine default” screen.

(See “(2) Accessing the machine default settings” on page 7-41.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Silent mode” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Silent mode” screen will be displayed. Inch specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Key sound ON/OFF	On
Silent mode	On	Down
Date/Time	2001/10/30 14:02
Time difference	GMT+08:00
Management code change	5000	Change #

Metric specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Key sound ON/OFF	On
Silent mode	Off	Down
Date/Time	30/10/'01 14:02
Time difference	GMT+08:00
Change MGMT code with #	5000	Change #
Default setting

3Touch the “On” key if you want to use the silent mode. Inch specifications

Silent mode Back Close

Use this mode if you are distracted by moter sounds.

Off

On

Default setting - Machine default

Metric specifications

Silent mode Back Close

Shorten laser motor rotating time for before/after copying

Use this mode if you are distracted by motor sound.

Off

On

Default setting - Machine default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-53