Kyocera 3035 Repeat copying ON/OFF, Initial mode, touch the On key. Inch specifications, OnOn

Section 7 COPIER MANAGEMENT FUNCTIONS

●Repeat copying ON/OFF

Perform the following procedure to set whether or not to prohibit repeat copying, as well as whether or not to make repeat copying the default setting in the initial mode.

NOTE

This setting is displayed when the optional Hard Disk is installed.

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Modify Copy” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Modify Copy” screen will be displayed. Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Preset limit	999 Set
Modify Copy	On / Default Off	Down
Display register key	On
Customize(Main function)
Customize(Add function)		Change #
Default setting

Metric specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Preset limit	999 Set
Modify copy	On / Default Off	Down
Display"Register"key	On
Customize(Main function)
Customize(Add function)		Change #
Default setting

3If you want to prohibit repeat copying, touch the “Off” key. If you want to make repeat copying the default setting in the

initial mode, touch the “On” key. Inch specifications

Modify Copy Back Close

Select ON to activate Modify Copy or OFF to inactivate it .

FunctionDefault

OffOff

OnOn

Default setting - Copy default

Metric specifications

Modify copy Back Close

Select ON to activate Modify Copy or OFF to inactivate it.

FunctionDefault

OffOff

OnOn

Default setting - Copy default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-83