Kyocera 3035 manual Paper selection, Copy default

Section 7 COPIER MANAGEMENT FUNCTIONS

●Paper selection

Perform the following procedure to set whether the copier will automatically select the same size of copy paper as the original once an original is set, or whether the designated default drawer[cassette]

3Touch the “APS” key to have the same size of copy paper as the original selected automatically, and the “Default

drawer[cassette]” key to have paper fed from the designated default drawer[cassette].

will be automatically selected.

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Inch specifications

Select paper

Set auto paper selection mode.

APS

Default drawer

Default setting - Copy default

Metric specifications

Select paper

Setting paper select mode.

APS

Default cassette

BackClose

BackClose

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Select paper” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Select paper” screen will be displayed. Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Select paper	APS
Select paper type(APS)	Plain	Down
Default drawer	1st paper
Drawer for cover paper	Bypass
Default magnification	Manual	Change #
Default setting

Metric specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Select paper	APS
Select paper type(APS)	Plain	Down
Default cassette	1st paper
Cassette for cover paper	Bypass
Default mode	Manual	Change #
Default setting

Default setting - Copy default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-68