Kyocera 3035 manual Multi-bypass tray paper settings, Paper size and type, Bypass setting

Section 7 COPIER MANAGEMENT FUNCTIONS

3. Multi-bypass tray paper settings

(1) Paper size and type

Perform the following procedure in order to use the multi-bypass tray to feed copy paper.

1With the content of the “Basic” tab displayed, press the [Default Setting/Counter] key.

The “Default setting” screen will be displayed.

2Touch the “Bypass setting” key.

The “Bypass setting” screen will be displayed. Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

3Specify the desired method of selecting the paper size.

If you select “Auto Detection” here, select the desired unit of measure (“Centimeter” or “Inch”) as well, and then go directly to step 5. If you want to select a custom paper size, touch the “Input size” and then go to the next step.

Inch specifications

Default setting / Counter

Bypass setting		Back	Close
Paper size	Unit	Paper type
Auto			Select
	Centimeter	Auto
Detection			paper type
Input size			Auto
	Inch
Others
Standard

Metric specifications

Default setting / Counter

Bypass setting		Back	Close
Paper size	Unit	Paper type
Auto	Centimeter	Auto	Select
Detection			paper type
Input size	Inch		Auto
Others
Standard

4Touch the “+” key or the “-” key to change each of the displayed sizes (length and width) to the desired settings.

*In metric specification copiers, the desired sizes can also be entered directly by touching the corresponding “#-Keys” key and then using the keypad.

Inch specifications

Default setting / Counter

Bypass setting						Back	Close
Paper size	(37/8~115/8)			(57/8~17)		Paper type
Y	1111/16	"	X	169/16	"
Auto	+			+		Auto	Select
Detection							paper type
Input size	–			–			Auto
Others
Standard
Metric specifications
Default setting / Counter							Close
Bypass setting						Back
Paper size	(98~297)			(148~432)		Paper type
Y	297	mm	X	420	mm
Auto	+			+		Auto	Select
Detection							paper type
Input size	–			–			Auto
Others	#-Keys			#-Keys
Standard

5Designate the paper type by pressing the “Select paper type” key or the “Auto” key, as desired.

If you pressed the “Select paper type” key, proceed to the next step.

If you pressed the “Auto” key, proceed directly to step 7. Inch specifications

Default setting / Counter

Bypass setting		Back	Close
Paper size	Unit	Paper type
Auto			Select
	Centimeter	Auto
Detection			paper type
Input size			Auto
	Inch
Others
Standard

Metric specifications

Default setting / Counter

Bypass setting		Back	Close
Paper size	Unit	Paper type
Auto	Centimeter	Auto	Select
Detection			paper type
Input size	Inch		Auto
Others
Standard

7-87