Kyocera 3035 manual Overlaying one image over another Form overlay mode, Set form Press Start Key

Section 5 OTHER CONVENIENT FUNCTIONS

9. Overlaying one image over another [Form overlay mode]

This mode can be used to scan the first original (the “form”) into memory and have its image overlaid onto copies made from subsequent originals. If the optional Hard Disk is installed on your copier, it is also possible to register and store in memory, in advance, the images that you want to use as original forms.

A A

B B

C C

NOTE

Refer to “(2) Form registration” on page 6-1 for the procedure to register images as forms.

1Touch the “Function” tab. The content of the “Function” tab will be displayed.

2Touch the “Forms Overlay” [“Form overlay”] key. The “Forms Overlay” [“Form overlay”] screen will be displayed.

Inch specifications

Ready to copy.				Paper size	Set
				11x81/2"
Select	2 sided/	Select	Combine
paper	Separation	orig. size
Exposure	Reduce	Auto	Batch	Up
mode	/Enlarge	Selection	scanning
Orig.image	Margin/	Page #	Forms	Down
quality	Centering		Overlay
Sort/	Border	Cover	Booklet
Finished	Erase	Mode
Basic	User choice	Function	Program
Metric specifications
Ready to copy.				Paper size	Set
Select	2-sided/	Select	Merge copy
paper	Split	size orig.
Exposure	Reduce/	Auto	Large # of	Up
mode	Enlarge	selection	originals
Image	Margin/	Page	Form	Down
quality	Imag. shift	numbering	overlay
Sort/	Erase	Cover	Booklet
Finished	Mode	Mode
Basic	User choice	Function	Program

3Touch the “On” key.

The screen to set the shading level of the form image will be displayed.

Inch specifications

Ready to copy.			Paper size	Set
			11x81/2"
	Register
Forms Overlay		Back		Close
Off	Overlay first scanned image onto
	the scanned image or on registered from.
On
Metric specifications
Ready to copy.			Paper size	Set
Form overlay	Register	Back		Close
Of	Overlay 1st image on the scanned
	image or on registered form.

On

4Touch the “+” key or the “-” key to select the level of shading that you want to use for the original form.

The desired shading level can be set to any 10% increment between 10% and 100%.

*A sample of the effect that the selected shading level will produce will be displayed to the right of the entry field.

Inch specifications

Place from first then press start.

Forms Overlay	Register	Back	Close
	(10~100)
Exposure	50 %
Off
On	Scan form once
	Form
	Selected

Metric specifications

Set form.

Press Start Key.

Form overlay	Register	Back	Close
(10	100)
Exposure	50 %
Off
On	Scan form once
	Form
	selection

5If the optional Hard Disk is installed on your copier, it is also possible to register and store in memory, in advance, the

images that you want to use as original forms. If you want to use a previously registered image as the form, touch the “Form Selected” [“Form selection”] key and go to the next step.

If you want to scan in a new image, go directly to step 9.

5-20