Kyocera 3035 manual 2Misfeed in Document Processor optional JAM 70 to

Section 9 TROUBLESHOOTING

2Misfeed in Document Processor (optional) (JAM 70 to 76)

If the message below appears, a misfeed has occurred in the Document Processor. Remove the misfed original using the procedure given below.

Inch specifications

Paper misfeed.

1.Open the document processor.

2.Raise the reverse unit up.

3.Turn the left dial.

4.Remove original(s).

5.Close Document processor.

JAM 73

Metric specifications

Paper misfeed.

1.Open document processor.

2.Raise reverse unit up.

3.Turn dial left.

4.Remove original (s).

5.Close Document processor.

JAM 73

1If the original is on the original table, remove it.

2Open the Document Processor original cover.

3

4

5

6

7

If the misfed original is found, remove it.

*If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later.

Raise the reversing unit.

If the misfed original is found, remove it.

*If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later.

Turn the left knob to eject and remove the misfed original.

Close the Document Processor original cover.

9-10