Kyocera 3035 manual At the end of copying

Models: 3035

1 296
Download 296 pages 58.02 Kb
Page 36
Image 36

Section 4 BASIC OPERATION

9

9. At the end of copying

Finished copies will be ejected onto the copy store section.

IMPORTANT!

Up to 250 copies can be stored on the copy store section.

If “The output tray exceeds capacity. Remove the paper.” [“Too much paper in output tray. Remove paper.”] is displayed, there are too many copies on the top tray. Remove the copies from the copy store section and then press the [Start] key to resume copying.

If ejected copies come out curled, or are otherwise not stored cleanly, remove the paper from the drawer[cassette] or the multi- bypass tray (whichever is currently being used), turn the paper over, set it again in that location and try to copy again.

NOTE

Metric specification copiers have a main power switch cover.

CAUTION

If the copier will not be used for a short period of time (overnight, etc.), turn the main power switch OFF (O). If it will not be used for an extended period of time (vacations, etc.), remove the power plug from the outlet for safety purposes during the time the copier is not in use.

IMPORTANT!

(For metric specification copiers)

If you turn the main power switch OFF (O) or remove the power plug from its outlet when the optional Printer Kit, Printer/Scanner Kit or Fax Kit is installed on your copier, the corresponding print out and fax communication operations will not be possible. To keep those functions enabled, press the [Power] key to put the copier into the Sleep mode rather than turning the main power switch OFF.

4-4

Page 36
Image 36
Kyocera 3035 manual At the end of copying