Kyocera 3035 manual Copy default settings, Aps

Section 7 COPIER MANAGEMENT FUNCTIONS

(4) Copy default settings

The following table indicates the copy default settings available in this copier. Change any or all of the settings as desired in order to make the most effective use of your copier.

Default setting	Description		Available settings		Factory	Reference
					setting	page
Exposure mode	Selects between auto exposure and manual	Manual / Auto		Manual		7-63
	exposure as the default copy exposure mode in the
	initial mode.
Exposure adjustment	Changes the incremental step to be used during	1 step / 0.5 step		1 step		7-64
step	adjustment of the copy exposure.
Original quality	Determines the default setting that will be used for	Text+Photo / Text /		Text+Photo		7-65
	the image quality in the initial mode.	Photo
Eco print mode ON/OFF	Determines whether the Eco print mode will be the	On / Off		Off		7-66
	default setting in the initial mode. In this case, the
	amount of toner that is used to make the copies will
	be reduced, and images will be printed out relatively
	lighter than normal.
Background exposure	Adjusts the ground color of the copied paper.	-2 – +2		Standard setting		7-67
adjustment				(0)
Paper selection	Sets whether the copier will automatically select the	APS / Default		APS		7-68
	same size of copy paper as the original once an	drawer[cassette]
	original is set (APS: auto paper selection mode), or
	whether the drawer[cassette] selected “Default
	drawer” [“Default cassette”] setting will be
	automatically selected.
Paper type (auto paper	Sets which types of paper can be selected under the	Off / On		On		7-69
selection mode)	auto paper selection mode.
	* It is possible to select the type of paper that has	Plain		Plain
	been designated for the drawer[cassette] currently	Preprinted
	in use.	Recycled
		Letterhead
		Color [Colour]
		Prepunched
		Rough
		Bond
		High quality
		Vellum
		Custom 1 –
		Custom 8
Default drawer[cassette]	Sets one drawer[cassette] that will be selected	1st paper		1st paper		7-70
	automatically regardless of the size of paper loaded	2nd paper
	in that drawer[cassette].	3rd paper
	* It is NOT possible to select the multi-bypass tray	4th paper
	as the default drawer[cassette].
	* The setting for drawer[cassette] No.3 and No.4 will
	only be available when the optional Paper Feeder
	is installed on your copier.

7-59