Kyocera 3035 Multi-bypass tray, Insert guides, @ Toner container, Front cover, Main power switch

Section 2 NAMES OF PARTS

7B8C

I

9D 0E	A
F	0

K J L G H

0 Multi-bypass tray

(Load paper here when copying onto small-size or special paper.)

!Insert guides

(Be sure to set the paper width when loading paper on the multi-bypass tray.)

@Toner container

#Toner container release lever (Operate to replace the toner container.)

$Waste toner box

%Cleaning shaft

(Pull and push back in after toner container replacement or when copy images become soiled with toner.)

^Front cover

(Open to replace the toner container or waste toner box.)

&Main power switch

(Turn ON ( ) before starting to make copies.)

*Main power switch cover (only on metric specification copiers) (Open this cover in order to access the main power switch.)

(Copy store section

(Copied paper is stored here.)

)Length adjustment plate

(Adjust to the length of the paper to be set in the drawer[cassette].)

⁄Width adjustment lever

(Hold the lever and adjust the width guide to the width of the paper to be set in the drawer[cassette].)

¤Handles for transport

(Become handles when pulled out.)

2-2