Kyocera 3035 manual 2Combining and printing out stored documents

Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS

6Touch the “Select orig. size” [“Select size orig.”] key, the “Select regi. size” key, the “Original type” key, the “Reduce/

Enlarge” key and/or the “Orig.set direction” key, if you want to perform the corresponding settings.

If you want to access the “Scanning density” key and/or the “Orig.image quality” [“Image quality”] key to make those settings, touch the “Quality” key.

If you want to set access the “Border Erase” [“Erase Mode”] key and/or the “Continuous scanning” [“Multiple scanning”] key to make those settings, touch the “Edit” key.

7Press the [Start] key. Scanning of the documents will start. Once all of the documents have been completely scanned,

the touch panel will return to the screen in step 3.

If you want to register another document, repeat steps 3 through 7.

8Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

2Combining and printing out stored documents

Perform the following procedure when you want to combine and print out documents that are stored in a synergy print box.

1Press the [Document Management] key. The “Document Management” screen will be displayed.

2Touch the “Document printing” key under “Synergy Print Box”. The screen to select the synergy print box will be

displayed.

Inch specifications

Select function.

				25/10/'01 19:20
Document Management					End
Shared Data Box		Synergy Print Box		Form box
Document	Document	Document	Document	Form
reg.	printing	reg.	printing	reg.
Box		Box		Box
Editing		Editing		Editing

Metric specifications

Select function.				25/10/'01	19:20
Document Management					End
Shared Data Box		Synergy Print Box		Form box
Document	Document	Document	Document	Form
registr.	printing	registr.	printing	registr.
Box		Box		Box
Editing		Editing		Editing

6-10